SECONDARY CRUSHING & SORTED RECYCLING / RP-IC-1315
Impact Crusher
Secondary crushing for medium-hard materials and sorted construction waste.
- Listed capacity
- 120–250 t/h
- Maximum feed
- 350 mm
Capacity depends on feed properties, feeding continuity and discharge setting. Confirm the final configuration for your site.
Request a configuration
SECONDARY CRUSHING & SORTED RECYCLING
Secondary crushing for medium-hard materials and sorted construction waste.
The RP-IC-1315 Impact Crusher serves limestone processing, aggregate production and construction waste recycling. Three-stage impact plates, high-chromium blow bars and a keyless rotor connection are combined with hydraulic opening for inspection and wear-part maintenance.
Features and operating benefits.
Three-stage impact plates
Material receives repeated impacts between the rotor and impact plates. Final grading depends on operating settings and the screening circuit.
Hydraulic opening
The opening arrangement provides access for chamber inspection and wear-part servicing. Isolate power and secure the assembly before maintenance.
High-chromium blow bars
The blow bars deliver the crushing impact. Plan inspection, replacement and spare stock around feed abrasiveness and observed wear.
Keyless rotor connection
The rotor uses a keyless connection. Check fastening condition, wear and vibration as part of the maintenance routine.
Where it fits.
Use it for secondary crushing of medium-hard materials such as limestone and for sorted construction waste. Remove metal, timber and other contaminants before feeding. For hard or highly abrasive rock, compare wear costs with a jaw-and-cone crushing arrangement.
Working principle & circuit integration.
Feed is struck by the rotor blow bars, directed toward the impact plates and reduced through repeated impacts before discharge. A typical circuit includes feeding or primary crushing, impact crushing and screening. Recycling lines also need sorting and contaminant removal.
Engineering & installation interfaces.
PENDING CONFIRMATION
Site-specific drawings required
Dimensioned installation drawings, foundation loads, transport envelope, lifting points and interface dimensions have not been supplied for this preview. Obtain the approved drawing package before civil works or installation.
RP-IC-1315 technical specifications.
| Parameter | Value |
|---|---|
| Rotor dimensions | 1300 × 1500 mm |
| Maximum feed size | 350 mm |
| Discharge range | 40–100 mm |
| Capacity | 120–250 t/h |
| Main motor power | 180–220 kW |
| Machine weight | Approx. 19 t |
Remove metal, timber and contaminants. Feed abrasiveness, wear, settings and circulating load affect performance; compare hard-rock wear costs.
Selection and operating conditions.
Provide material type, maximum feed size, abrasiveness, target throughput and end use. The listed 120–250 t/h range depends on feed properties, wear condition, discharge settings and circulating load. Confirm the motor configuration in the final technical proposal.
PENDING CONFIRMATION
Performance curves not supplied
No independent measured throughput curve or test report is supplied. Confirm site output, grading and final equipment settings for the project.
Prepare a useful equipment brief.
Review the material and complete process before choosing the equipment settings.
- Material type, maximum feed size and abrasiveness
- Target throughput, finished sizes and product end use
- Sorting, contaminant removal, wear condition and screening load
- Project location, power and installation conditions
Packing, delivery & support.
Minimum order: 1 unit. Lead time: 30–45 days, subject to the agreed order schedule. Supplied with standard export packing; confirm shipping arrangements for the destination and transport dimensions. Installation drawings, an operating manual and remote technical guidance are available. On-site supervision and operator training can be arranged for the project.
Source-supplied conditions for discussion; confirm schedule, scope and shipping in the order.
Questions before you specify.
Is it suitable for every type of hard rock?
Review hardness and abrasiveness first. Highly abrasive feed may increase blow-bar consumption; a cone crusher may be worth evaluating.
Can it process mixed demolition waste directly?
Sort the feed, remove metal and other contaminants, and confirm that size and composition suit the selected configuration.
Can crusher adjustment alone deliver a specified grading?
Product grading also requires screening. Match screen apertures, recirculation and crusher settings to the required sizes.
Project & qualification evidence.
PENDING CONFIRMATION
Evidence under review
No approved customer case, certificate original or independent test report is attached to this product record. Generic scene images must not be treated as project evidence.
Start with your material.
Share the material, maximum feed size, required capacity, finished sizes and project location. Include downstream equipment and power supply where available.
Prefer email? 18337606870@163.com
Form preview only. Online delivery is not connected. No information is sent.